{"title":"Bases","description":"","products":[{"product_id":"siemens-db-adpt","title":"Siemens DB-ADPT (500-094187) Detector Base Adapter for DB-3\/DB-3S Bases","description":"\u003cp\u003eThe Siemens DB-ADPT (500-094187) is a base adapter that lets current Series-11 detectors, such as the PE-11 and FP-11, be installed on existing DB-3 or DB-3S bases.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits Series-11 detectors onto older DB-3 \/ DB-3S bases\u003c\/li\u003e\n\u003cli\u003eRetrofit accessory: installed bases can stay in place when detectors are upgraded\u003c\/li\u003e\n\u003cli\u003ePart number 500-094187\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eListed as an accessory in the Siemens FP-11 and OP121 data sheets.\u003c\/p\u003e","brand":"Siemens","offers":[{"title":"Default Title","offer_id":44296810463508,"sku":"DB-ADPT","price":45.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/siemens-bases-default-title-siemens-db-adpt-500-094187-detector-base-adapter-31950606401760.jpg?v=1780945116"},{"product_id":"siemens-abhw-4s","title":"Siemens ABHW-4S Intelligent Audible Detector Base, 520 Hz Low-Frequency Sounder","description":"\u003cp\u003eThe Siemens ABHW-4S (S54320-F14-A1) is an intelligent supervised audible detector base with a 520 Hz low-frequency sounder for sleeping areas.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo volume levels: 85 dB or more high, 75 dB or more low\u003c\/li\u003e\n\u003cli\u003eSix tones, including Temporal 3 and Canadian March 30\u003c\/li\u003e\n\u003cli\u003eUL and ULC listed; external 16 to 33 VDC supply\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Siemens","offers":[{"title":"Default Title","offer_id":44296814690580,"sku":"ABHW-4S","price":198.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/siemens-bases-default-title-siemens-abhw-4s-s54320-f14-a1-sounder-base-31896940019936.jpg?v=1780945113"},{"product_id":"simplex-4098-9794-ssd-sounder-base","title":"Simplex 4098-9794 TrueAlarm Addressable Sensor Sounder Base, Frost White","description":"\u003cp\u003eThe Simplex 4098-9794 is a TrueAlarm addressable sensor base with a built-in piezo sounder. It carries the addressable electronics for the sensor head and also acts as a local audible appliance, which suits sleeping rooms and dwelling units.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSounder output 88 dBA minimum at 10 ft (3 m), per UL 464 and UL 268\u003c\/li\u003e\n\u003cli\u003eSounder powered from a steady 18 to 32 VDC source or from a NAC, following the NAC pattern (Temporal, March Time)\u003c\/li\u003e\n\u003cli\u003eAlarm current 20 mA at 24 VDC (24 mA maximum at 32 VDC)\u003c\/li\u003e\n\u003cli\u003eSelectable supervised (continuous 24 VDC) or unsupervised (NAC powered) operation\u003c\/li\u003e\n\u003cli\u003eIDNet or MAPNET II communication, auto-selected, one address per base\u003c\/li\u003e\n\u003cli\u003eScrew terminals for 18 to 14 AWG in\/out wiring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAccepts the 4098-9714 photoelectric and 4098-9733 heat sensors (ordered separately). Mounts on a 4 in octagonal or square box (1-1\/2 in deep) or a single-gang box (2 in deep).\u003c\/p\u003e","brand":"Simplex","offers":[{"title":"Default Title","offer_id":44296898707732,"sku":"4098-9794","price":103.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/simplex-bases-default-title-simplex-4098-9794-sensor-sounder-base-32672262193376.jpg?v=1780945010"},{"product_id":"simplex-4098-9791-4-wire-sensor-supervised-relay-base-with-led-indicator-connections-white","title":"Simplex 4098-9791 TrueAlarm 4-Wire Supervised Relay Sensor Base, White","description":"\u003cp\u003eThe Simplex 4098-9791 is a 4-wire TrueAlarm sensor base that lets an addressable smoke or heat sensor control a supervised remote relay.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConnects to the 2098-9737 supervised remote relay\u003c\/li\u003e\n\u003cli\u003eMAPNET II or IDNet; separate 24 VDC for the relay\u003c\/li\u003e\n\u003cli\u003eNot compatible with the 2120 CDT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Simplex","offers":[{"title":"Default Title","offer_id":44296898740500,"sku":"4098-9791","price":65.85,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/simplex-bases-default-title-simplex-4098-9791-4-wire-sensor-supervised-relay-base-31897056182496.jpg?v=1780945010"},{"product_id":"simplex-4098-9780-2-wire-sensor-supervised-relay-base-with-led-indicator-connections-white","title":"Simplex 4098-9780 2-Wire Sensor Supervised Relay Base, White","description":"\u003cp\u003eThe Simplex 4098-9780 is a white 2-wire sensor base with a supervised relay and connections for a remote LED indicator or unsupervised relay.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSupervised relay\u003c\/li\u003e\n\u003cli\u003eConnections for LED indicator or unsupervised relay\u003c\/li\u003e\n\u003cli\u003eNot compatible with the 2120 CDT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Simplex","offers":[{"title":"Default Title","offer_id":44296899068180,"sku":"4098-9780","price":89.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/simplex-bases-default-title-simplex-4098-9780-2-wire-sensor-supervised-relay-base-31897056674016.jpg?v=1780945008"},{"product_id":"simplex-4098-9773-520-hz-sounder-base-with-co","title":"Simplex 4098-9773 TrueAlarm CO Sensor Base with 520 Hz Sounder, IDNet","description":"\u003cp\u003eThe Simplex 4098-9773 is a TrueAlarm addressable carbon monoxide sensor base with a 520 Hz low-frequency sounder for IDNet channels; the fire sensing head is ordered separately.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWorks with head 4098-9714, 4098-9764 or 4098-9733\u003c\/li\u003e\n\u003cli\u003eSounder needs separate 16 to 32 VDC power\u003c\/li\u003e\n\u003cli\u003eFlush mount; CO cartridge 4098-9747 field replaceable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Simplex","offers":[{"title":"Default Title","offer_id":44296899363092,"sku":"4098-9773","price":383.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/simplex-sounder-bases-default-title-simplex-truealarm-4098-9773-co-sensor-base-with-520hz-sounder-31897056608480.jpg?v=1780945007"},{"product_id":"simplex-4098-9772-sensor-base-with-520-hz-sounder","title":"Simplex 4098-9772 TrueAlarm Sensor Base with 520 Hz Sounder, ULC","description":"\u003cp\u003eThe Simplex 4098-9772 is a TrueAlarm addressable sensor base with a built-in 520 Hz low-frequency sounder, suited to sleeping areas such as hotel rooms and dormitories.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e520 Hz at 85 dBA; single IDNet address\u003c\/li\u003e\n\u003cli\u003eAccepts TrueAlarm photo, photo\/heat or heat sensors (sold separately)\u003c\/li\u003e\n\u003cli\u003eUL 268, UL 464, ULC S529, CSFM, FM\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Simplex","offers":[{"title":"Default Title","offer_id":44296899723540,"sku":"4098-9772","price":146.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/simplex-bases-default-title-simplex-4098-9772-sounder-base-31897056346336.jpg?v=1780945007"},{"product_id":"simplex-4098-9771-co-sounder-base-extended-life","title":"Simplex 4098-9771 TrueAlarm CO Sensor Base with Sounder, Addressable IDNet","description":"\u003cp\u003eThe Simplex 4098-9771 is a TrueAlarm addressable carbon monoxide sensor base with a built-in piezo sounder. It adds CO detection to a TrueAlarm photoelectric, photo\/heat or heat sensor head, which is ordered separately.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAccepts 4098-9714 photo, 4098-9754 photo\/heat or 4098-9733 heat sensor heads (not included)\u003c\/li\u003e\n\u003cli\u003eBase and head share one IDNet address; compatible panels can correlate CO and smoke readings to reduce nuisance alarms\u003c\/li\u003e\n\u003cli\u003eSensor powered from IDNet; sounder needs a separate 24 VDC or NAC connection\u003c\/li\u003e\n\u003cli\u003eSounder 18 to 32 VDC, 17 mA at 24 VDC, 88 dBA minimum at 10 ft (UL 464)\u003c\/li\u003e\n\u003cli\u003eListed to UL 268 and UL 2075; ULC listed to CSA 6.19-01\u003c\/li\u003e\n\u003cli\u003eRequires 4100ES\/4010ES software 2.01.02 or later, or 4100U software 12.05 or later\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe CO element has a limited life with built-in end-of-life warnings; it is renewed with the 4098-9747 replacement cartridge rather than a new base.\u003c\/p\u003e","brand":"Simplex","offers":[{"title":"Default Title","offer_id":44296900182292,"sku":"4098-9771","price":361.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/simplex-bases-default-title-simplex-4098-9771-co-base-with-sounder-31897056542944.jpg?v=1780945005"},{"product_id":"edwards-siga-sb","title":"Edwards SIGA-SB Signature Series Standard Detector Base, White","description":"\u003cp\u003eThe Edwards SIGA-SB is the standard mounting base for Signature Series intelligent detectors. It passes the signaling line circuit through the detector location and is the base to choose when a SIGA-LED remote alarm indicator is required.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSLC terminals plus remote LED terminals for the SIGA-LED\u003c\/li\u003e\n\u003cli\u003eAccepts 12 to 18 AWG wire (16 or 18 AWG preferred)\u003c\/li\u003e\n\u003cli\u003eFits North American single-gang and 3-1\/2 or 4 in. octagon boxes, and BESA boxes on 60.3 mm centres\u003c\/li\u003e\n\u003cli\u003eWhite high-impact polymer housing; optional SIGA-TS trim skirt\u003c\/li\u003e\n\u003cli\u003eOperating range 0 to 49 °C, 0 to 93% RH non-condensing\u003c\/li\u003e\n\u003cli\u003eUL 268, UL 521 and CAN\/ULC-S529\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor a relay or line isolator at the detector, see the SIGA-RB and SIGA-IB bases. For a 4 in. square box, use the SIGA-SB4.\u003c\/p\u003e","brand":"Edwards","offers":[{"title":"Default Title","offer_id":44296990261524,"sku":"SIGA-SB","price":12.65,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/edwards-bases-default-title-edwards-siga-sb-standard-base-34869974335712.jpg?v=1780944916"},{"product_id":"edwards-siga-rb4","title":"Edwards SIGA-RB4 Signature Series Relay Detector Base, 4 in., Form C","description":"\u003cp\u003eThe Edwards SIGA-RB4 is a 4 in. relay detector base for Signature series intelligent detectors. It adds a Form C relay contact at the detector location, which can be used for local control functions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e4 in. detector base with Form C relay\u003c\/li\u003e\n\u003cli\u003eFor Edwards Signature series intelligent detectors\u003c\/li\u003e\n\u003cli\u003eDetector head sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConfirm compatibility with your Signature detector and panel before ordering.\u003c\/p\u003e","brand":"Edwards","offers":[{"title":"Default Title","offer_id":44296991768852,"sku":"SIGA-RB4","price":58.65,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/edwards-bases-default-title-edwards-siga-rb4-detector-base-34869974302944.jpg?v=1780944913"},{"product_id":"edwards-siga-rb","title":"Edwards SIGA-RB Signature Detector Base with Form C Relay","description":"\u003cp\u003eThe Edwards SIGA-RB is a Signature Series detector mounting base with a built-in Form C relay, for Signature intelligent detectors.\u003c\/p\u003e","brand":"Edwards","offers":[{"title":"Default Title","offer_id":44296993472788,"sku":"SIGA-RB","price":72.7,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/edwards-bases-default-title-edwards-siga-rb-detector-base-31896777097440.jpg?v=1780944912"},{"product_id":"edwards-siga-ib4","title":"Edwards SIGA-IB4 Signature Detector Base with Isolator, 4 in. Box, with TS4 Skirt","description":"\u003cp\u003eThe Edwards SIGA-IB4 is a Signature Series detector mounting base with a built-in line isolator, for 4 in. square electrical boxes. It is supplied with a TS4 trim skirt.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDetector base with integral isolator\u003c\/li\u003e\n\u003cli\u003eMounts on a 4 in. square box\u003c\/li\u003e\n\u003cli\u003eIncludes TS4 trim skirt\u003c\/li\u003e\n\u003cli\u003eFor Signature Series intelligent detectors, such as Signature smoke, heat and CO detectors\u003c\/li\u003e\n\u003cli\u003eSignature loops support up to 250 addresses\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Edwards","offers":[{"title":"Default Title","offer_id":44297016246548,"sku":"SIGA-IB4","price":99.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/edwards-bases-default-title-edwards-siga-ib4-detector-base-with-isolator-31896770543840.jpg?v=1780944893"},{"product_id":"edwards-siga-ib","title":"Edwards SIGA-IB Signature Detector Base with Isolator","description":"\u003cp\u003eThe Edwards SIGA-IB is a Signature Series detector mounting base with a built-in line isolator, for Signature intelligent detectors.\u003c\/p\u003e","brand":"Edwards","offers":[{"title":"Default Title","offer_id":44297016508692,"sku":"SIGA-IB","price":68.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/edwards-bases-default-title-edwards-siga-ib-detector-base-with-isolator-34911183995104.jpg?v=1780944892"},{"product_id":"edwards-siga-ab4gt","title":"Edwards SIGA-AB4GT Signature Sounder Base, Fire and CO Tone Patterns","description":"\u003cp\u003eThe Edwards SIGA-AB4GT is a Signature Series sounder base that can sound both fire and carbon monoxide tone patterns. It fits under any Signature Series detector, shares the detector's address and can sound as a local alarm or as part of a zone.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWith a SIGA-TCDR temporal pattern generator on the loop, field-configurable for Fire or Fire-plus-CO mode (TC3 fire \/ TC4 CO patterns)\u003c\/li\u003e\n\u003cli\u003eRiser voltage 16 to 33 VDC; supervisory current 1.46 mA\u003c\/li\u003e\n\u003cli\u003eOperating current 31 mA low dBA, 52 mA high dBA\u003c\/li\u003e\n\u003cli\u003e3.2 kHz tone; high dBA default, lowered by cutting a jumper\u003c\/li\u003e\n\u003cli\u003eTC3 fire 86.5 \/ 90.8 dBA, TC4 CO 77.5 \/ 84.1 dBA (UL 268, reverberant, at 16 VDC)\u003c\/li\u003e\n\u003cli\u003e6.8 in. diameter, 0.8 in. above the box; indoor, 32 to 120 °F\u003c\/li\u003e\n\u003cli\u003eUL 268 and UL 464 listed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSIGA-TCDR and AB4G-SB surface box are ordered separately. The SIGA-AB4G is the fire-only version.\u003c\/p\u003e","brand":"Edwards","offers":[{"title":"Default Title","offer_id":44297028206868,"sku":"SIGA-AB4GT","price":137.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/edwards-bases-default-title-edwards-siga-ab4gt-sounder-base-for-fire-and-carbon-monoxide-detectors-31896767070432.jpg?v=1780944878"},{"product_id":"edwards-siga-ab4g","title":"Edwards SIGA-AB4G Signature Series Audible Sounder Base, 6.8 in.","description":"\u003cp\u003eThe Edwards SIGA-AB4G is a Signature Series sounder base that adds audible output to a single-function Signature detector. The base shares the address and programming of the detector seated in it, so it can sound a local alarm or join a zone or system alarm on command.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRiser voltage 16 to 33 VDC; 24 mA low \/ 41 mA high at 24 VDC\u003c\/li\u003e\n\u003cli\u003eTemporal output 75.5 dBA low, 80.7 dBA high; steady 79.5 \/ 84.5 dBA (UL 464, 24 VDC)\u003c\/li\u003e\n\u003cli\u003eDefaults to high volume and temporal; cut jumpers for low volume or steady tone\u003c\/li\u003e\n\u003cli\u003e6.8 in. (173 mm) diameter, 0.8 in. (21 mm) above the box\u003c\/li\u003e\n\u003cli\u003eFlush mounts to a 4 in. square, 2-1\/8 in. deep box or the AB4G-SB surface box\u003c\/li\u003e\n\u003cli\u003eUL 268 and UL 464 listed; indoor, 32 to 120°F\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNot for smoke\/CO detectors in fire-plus-CO mode; use the SIGA-AB4GT or SIGA-AB4G-LF for those. Detector sold separately.\u003c\/p\u003e","brand":"Edwards","offers":[{"title":"Default Title","offer_id":44297028960532,"sku":"SIGA-AB4G","price":140.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/edwards-bases-default-title-edwards-siga-ab4g-sounder-base-31896767922400.jpg?v=1780944877"},{"product_id":"siemens-db2-hr","title":"Siemens DB2-HR Detector Relay Base for H-Series and Cerberus PRO (S54370-F12-A1)","description":"\u003cp\u003eThe Siemens DB2-HR (S54370-F12-A1) is a low-profile, surface-mount detector relay base for Siemens intelligent addressable detectors. It is a redesign of the DB-HR and provides a relay output at the detector location.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFor H-Series and Cerberus PRO addressable detectors\u003c\/li\u003e\n\u003cli\u003eCompatible with multi-criteria detectors using ASA technology\u003c\/li\u003e\n\u003cli\u003eLow-profile, surface-mount design\u003c\/li\u003e\n\u003cli\u003e4.5 in. (11.4 cm) diameter\u003c\/li\u003e\n\u003cli\u003eListings: ULC, CSFM, FM, NYC\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Siemens","offers":[{"title":"Default Title","offer_id":44297719480596,"sku":"DB2-HR","price":129.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/siemens-bases-default-title-siemens-db2-hr-s54370-f12-a1-relay-base-31896949915872.jpg?v=1780944615"},{"product_id":"siemens-abhw-4b-cerberus-pro-audible-base-with-loop-power-option","title":"Siemens ABHW-4B Intelligent Audible Sounder Base with Loop-Power Option, 3 kHz","description":"\u003cp\u003eThe Siemens ABHW-4B (S54320-F13-A1) is an intelligent, supervised, addressable detector base with a built-in sounder, giving local audibility without a separate appliance. It can draw alarm power from the signal line circuit over two wires or run on external power.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3,000 Hz tone, up to 85 dBA at 10 ft\u003c\/li\u003e\n\u003cli\u003eSix configurable tones at two volume levels, including Canadian March Time\u003c\/li\u003e\n\u003cli\u003e16 to 33 VDC, loop or external power; 7.5 mA alarm current loop-powered on high\u003c\/li\u003e\n\u003cli\u003eListed to UL 268, UL 464, UL 2075, ULC-S525 and ULC-S529\u003c\/li\u003e\n\u003cli\u003eFits a 4 in. square box of 2.5 in. depth only (not a 4 in. octagon box)\u003c\/li\u003e\n\u003cli\u003e32°F to 120°F, 10 to 95% relative humidity\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDetector heads are ordered separately. Where a 520 Hz low-frequency sounder is required, use the ABHW-4S instead.\u003c\/p\u003e","brand":"Siemens","offers":[{"title":"Default Title","offer_id":44297870377236,"sku":"ABHW-4B","price":183.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/siemens-bases-default-title-siemens-abhw-4b-s54320-f13-a1-buzzer-version-audible-base-31896939790560.jpg?v=1780944543"},{"product_id":"simplex-4098-9775-sensor-base-with-remote-led-alarm-indicator-or-unsupervised-relay-connections-black","title":"Simplex 4098-9775 TrueAlarm Sensor Base, Remote LED\/Relay Connections, Black","description":"\u003cp\u003eThe Simplex 4098-9775 is a black TrueAlarm sensor base with connections for a remote LED alarm indicator or an unsupervised relay. The base carries the addressable electronics and DIP switch address and accepts detachable TrueAlarm photoelectric and heat sensors on IDNet or MAPNET II systems.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIDNet or MAPNET II, auto-selected; one address per base\u003c\/li\u003e\n\u003cli\u003eDIP switch addressing, accessible under the sensor\u003c\/li\u003e\n\u003cli\u003eScrew terminals for in\/out wiring, 18 to 14 AWG; colour-coded 18 AWG leads for remote LED or relay\u003c\/li\u003e\n\u003cli\u003eIntegral red LED: pulses for communication, steady for alarm or trouble\u003c\/li\u003e\n\u003cli\u003eMounts on a 4 in. octagonal or 4 in. square box; locking anti-tamper design\u003c\/li\u003e\n\u003cli\u003eAccepts 4098-9714\/9774 photo and 4098-9733\/9778 heat sensors\u003c\/li\u003e\n\u003cli\u003eUL, ULC and CSFM listed; FM approved\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOptional 2098-9808 remote LED or 4098-9822 relay (needs separate 24 VDC). White version: 4098-9789.\u003c\/p\u003e","brand":"Simplex","offers":[{"title":"Default Title","offer_id":44298337124628,"sku":"4098-9775","price":48.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/simplex-bases-default-title-simplex-4098-9775-sensor-base-black-31897057067232.jpg?v=1780944266"},{"product_id":"simplex-4098-5207-two-wire-5-in-base-for-conventional-and-addressable-detectors-remote-led-connections","title":"Simplex 4098-5207 5 in. Sensor Base with Remote LED Connections","description":"\u003cp\u003eThe Simplex 4098-5207 is a 5 in. sensor base for compatible Simplex 4098 detectors, with terminals for a remote alarm LED. Use it where the detector's own LED cannot be seen, such as above a ceiling, in a duct or in an elevator shaft.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e5 in. base with terminal block wiring\u003c\/li\u003e\n\u003cli\u003eRemote LED connections for a remote alarm indicator\u003c\/li\u003e\n\u003cli\u003eAnti-tamper locking feature\u003c\/li\u003e\n\u003cli\u003ePark position and address flag holder\u003c\/li\u003e\n\u003cli\u003eIntegral breakout locking key\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSensor head sold separately.\u003c\/p\u003e","brand":"Simplex","offers":[{"title":"Default Title","offer_id":44298341810452,"sku":"4098-5207","price":17.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/simplex-bases-default-title-simplex-4098-5207-5-inches-sensor-base-31897047433440.jpg?v=1780944262"},{"product_id":"siemens-db-11e-2","title":"Siemens DB-11E","description":"\u003ch1\u003eSiemens DB-11E is a standard base for Model ’H’-series “11” and Model “121”-series conventional detectors, as well as the Model ’H’-series addressable detectors\u003cbr\u003e\n\u003c\/h1\u003e","brand":"Siemens","offers":[{"title":"Default Title","offer_id":44298389455124,"sku":"DB-11E","price":23.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/siemens-bases-default-title-siemens-db-11e-standard-base-34869639184608.jpg?v=1780944225"},{"product_id":"simplex-4098-9776-standard-sensor-base-black","title":"Simplex 4098-9776 TrueAlarm Standard Sensor Base, Black","description":"\u003cp\u003eThe Simplex 4098-9776 is a black standard sensor base for Simplex TrueAlarm addressable sensors, used with the black 4098-9774 smoke sensor. The black finish suits dark ceilings where a white base would stand out.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStandard (non-sounder, non-relay) base for TrueAlarm sensors\u003c\/li\u003e\n\u003cli\u003eBlack finish to match black TrueAlarm sensors such as the 4098-9774\u003c\/li\u003e\n\u003cli\u003eTrueAlarm sensors communicate over IDNet two-wire communications\u003c\/li\u003e\n\u003cli\u003eFor systems on 4007ES, 4010ES, 4100ES and 4100U fire alarm control units\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBase only; the sensor is ordered separately.\u003c\/p\u003e","brand":"Simplex","offers":[{"title":"Default Title","offer_id":44298841522452,"sku":"4098-9776","price":51.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/simplex-bases-default-title-simplex-4098-9776-standard-sensor-base-black-31897056444640.jpg?v=1780944055"},{"product_id":"simplex-4098-9795-1","title":"Simplex 4098-9795 Dual-Address Sounder Base for 4098-9754 Multi-Sensor","description":"\u003cp\u003eThe Simplex 4098-9795 is a dual-address sounder base for the Simplex 4098-9754 multi-sensor, adding local audible signalling at the detector location.\u003c\/p\u003e","brand":"Simplex","offers":[{"title":"Default Title","offer_id":44298940743956,"sku":"4098-9795","price":116.2,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/simplex-bases-default-title-simplex-4098-9795-sounder-base-dual-address-31897056805088.jpg?v=1780943979"},{"product_id":"simplex-4098-9793-ssd-sensor-base-with-isolator","title":"Simplex 4098-9793 TrueAlarm IDNet Isolator Sensor Base","description":"\u003cp\u003eThe Simplex 4098-9793 is a TrueAlarm sensor base with built-in IDNet isolation, so a short circuit on one segment does not take down the rest of the loop.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAccepts TrueAlarm 4098-9714, 4098-9733 and 4098-9717 sensors\u003c\/li\u003e\n\u003cli\u003eFor 4100ES, 4010ES, 4008, 4010 and 4100U panels\u003c\/li\u003e\n\u003cli\u003eUL 268, ULC, CSFM and FM listed; sensor sold separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Simplex","offers":[{"title":"Default Title","offer_id":44298941595924,"sku":"4098-9793","price":95.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/simplex-bases-default-title-simplex-4098-9793-ssd-sensor-base-31897057165536.jpg?v=1780943977"},{"product_id":"simplex-4098-9792-ssd-sensor-base","title":"Simplex 4098-9792 SSD Sensor Base","description":"\u003ch1\u003eThe Simplex 4098-9792 Addressable Standard Sensor Base\u003c\/h1\u003e\n\u003cp\u003eSimplex 4098-9792 Addressable Sensor Base For use with Simplex Intelligent Control Panels (4010, 4020, 4100, 4100+, 4100U, 4100ES, 4008, and 2120) using IDNET and MAPNET II Communications.\u003c\/p\u003e\n\u003cp\u003eSimplex 4098-9792 Compatible Optional Accessories\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2098-9737 Remote or local mount supervised relay: DPDT contacts for resistive\/suppressed loads, power limited rating of 3 A @ 28 VDC; non-power limited rating of 3 A @ 120 VAC (requires external 24 VDC coil power)\u003c\/li\u003e\n\u003cli\u003e4098-9860 Remote or local mount supervised relay: SPDT dry contacts, power limited rating of 2 A @ 30 VDC, resistive; non-power limited rating of 0.5 A @ 125 VAC, resistive\u003c\/li\u003e\n\u003cli\u003e4098-9822 LED Annunciation Relay\u003c\/li\u003e\n\u003cli\u003e4098-9832 Adapter plate: Required for surface or semi-flush mounting to 4” square electrical box and for surface mounting to 4” octagonal box; Can be used for cosmetic retrofitting to existing 6-3\/8” diameter base product\u003c\/li\u003e\n\u003cli\u003e2098-9808 Remote red LED Alarm Indicator: Mounts on single gang box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSimplex 4098-9792 For Use With Simplex Truealarm Sensor Heads:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4098-9714 Photoelectric Smoke\u003c\/li\u003e\n\u003cli\u003e4098-9717 Ionization Smoke\u003c\/li\u003e\n\u003cli\u003e4098-9733 Heat\u003c\/li\u003e\n\u003cli\u003e4098-9754 Multi-Sensor\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Simplex","offers":[{"title":"Default Title","offer_id":44298944938260,"sku":"4098-9792","price":53.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/simplex-bases-default-title-simplex-4098-9792-standard-sensor-base-white-32602788004064.jpg?v=1780943976"},{"product_id":"simplex-4098-9789-lifealarm-sensor-base-with-led-output","title":"Simplex 4098-9789 TrueAlarm Sensor Base with Remote LED\/Relay Connections","description":"\u003cp\u003eThe Simplex 4098-9789 is a TrueAlarm analog sensor base with wired leads for a remote LED alarm indicator or an unsupervised relay; it is not a supervised relay base.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIDNet or MAPNET II, one address per base\u003c\/li\u003e\n\u003cli\u003eAccepts 4098-9714 photo, 4098-9733 and 4098-9734 heat sensors\u003c\/li\u003e\n\u003cli\u003eWorks with 2098-9808 remote LED or 4098-9822 relay\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Simplex","offers":[{"title":"Default Title","offer_id":44298945757460,"sku":"4098-9789","price":49.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/simplex-bases-default-title-simplex-4098-9789-sensor-base-31897056837856.jpg?v=1780943975"},{"product_id":"simplex-4098-9788-ssd-2-wire-detector-base-with-remote-led","title":"Simplex 4098-9788 2-Wire Detector Base with Remote LED Connections","description":"\u003cp\u003eThe Simplex 4098-9788 is a two-wire mounting base for 4098 Series smoke and heat detectors and the QuickConnect2 sensor. Field wiring lands on the base, so heads can be removed and replaced without disturbing the circuit.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides remote alarm LED connections when used with photoelectric or ionization smoke detectors\u003c\/li\u003e\n\u003cli\u003ePlain two-wire base (no options) when used with heat detectors or QuickConnect2\u003c\/li\u003e\n\u003cli\u003eScrew terminals for IDC in\/out wiring, 18 to 14 AWG\u003c\/li\u003e\n\u003cli\u003eFits a 4 in. octagonal or square box 1-1\/2 in. deep, or a single-gang box 2 in. deep\u003c\/li\u003e\n\u003cli\u003eAssembled diameter 124 mm (4-7\/8 in.); base height 17 mm (11\/16 in.)\u003c\/li\u003e\n\u003cli\u003eFlush mounts level with the surface or recessed up to 1\/4 in.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSurface mounting and retrofits require the 4098-9832 adapter plate. For a relay output use the 4098-9683; for four-wire circuits use the 4098-9682.\u003c\/p\u003e","brand":"Simplex","offers":[{"title":"Default Title","offer_id":44298960634132,"sku":"4098-9788","price":16.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/simplex-bases-default-title-simplex-4098-9788-2-wire-base-31897056936160.jpg?v=1780943974"},{"product_id":"simplex-4098-9770-co-sensor-base-extended-life","title":"Simplex 4098-9770 TrueAlarm Addressable CO Sensor Base, Standard","description":"\u003cp\u003eThe Simplex 4098-9770 is a TrueAlarm addressable CO sensor base that adds carbon monoxide sensing to a TrueAlarm sensor location while using only one IDNet address. It holds an electrolytic CO sensing module alongside a TrueAlarm sensor head (ordered separately) and is powered from the IDNet channel, so existing base locations can be upgraded without new wiring.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUL 2034 life-safety CO alarm detection; UL 2075 level monitoring above 30 ppm for ventilation control\u003c\/li\u003e\n\u003cli\u003eWith a photo or photo\/heat head, CO data supports false alarm reduction and faster fire detection\u003c\/li\u003e\n\u003cli\u003eAccepts 4098-9714 photoelectric, 4098-9764 photo\/heat or 4098-9733 heat sensor heads\u003c\/li\u003e\n\u003cli\u003e10-year CO sensor life tracked by date code, with 12- and 6-month expiry notices\u003c\/li\u003e\n\u003cli\u003eAir velocity 0 to 1,000 ft\/min with photo heads; 15 to 95 % RH\u003c\/li\u003e\n\u003cli\u003eListed to UL 268 and UL 2075; ULC listed to CSA 6.19-01; FM approved\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRequires 4007ES, 4010ES or 4100ES software 2.01.02 or higher, or 4100U software 12.05 or higher. Mounts on a 4 in octagonal or square box (1-1\/2 in deep) or a single-gang box (2 in deep).\u003c\/p\u003e","brand":"Simplex","offers":[{"title":"Default Title","offer_id":44298961420564,"sku":"4098-9770","price":350.85,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/simplex-bases-default-title-simplex-4098-9770-truealarm-co-sensor-base-standard-operation-31897056477408.jpg?v=1780943973"},{"product_id":"siemens-db-x3rs-1","title":"Siemens DB-X3RS Series-3 Detector Mounting Base with Relay","description":"\u003cp\u003eThe Siemens DB-X3RS is a Series-3 detector mounting base with a built-in relay, used to control auxiliary equipment from a compatible Siemens detector location.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSeries-3 detector base\u003c\/li\u003e\n\u003cli\u003eBuilt-in relay\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Siemens","offers":[{"title":"Default Title","offer_id":44299017355540,"sku":"DB-X3RS","price":222.55,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/siemens-bases-default-title-siemens-db-x3rs-series-3-mounting-base-with-relay-31896949948640.jpg?v=1780943890"},{"product_id":"siemens-db-3s-1","title":"Siemens DB-3S Series-3 Detector Base for Siemens Detectors","description":"\u003cp\u003eThe Siemens DB-3S is a Series-3 detector base used to mount and wire compatible Siemens plug-in detectors.\u003c\/p\u003e","brand":"Siemens","offers":[{"title":"Default Title","offer_id":44299017388308,"sku":"DB-3S","price":29.85,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/siemens-bases-default-title-siemens-db-3s-series-3-base-31896949555424.jpg?v=1780943889"},{"product_id":"siemens-db-11-2","title":"Siemens DB-11","description":"\u003ch1\u003eSiemens DB-11\u003c\/h1\u003e\u003cp\u003eSiemens DB-11\u003c\/p\u003e","brand":"Siemens","offers":[{"title":"Default Title","offer_id":44299017421076,"sku":"DB-11","price":21.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/siemens-bases-default-title-siemens-db-11-low-profile-surface-mount-base-31896940511456.jpg?v=1780943888"},{"product_id":"siemens-db-hr","title":"Siemens DB-HR Relay Detector Base, Low Profile, Surface Mount, 4-Wire, 4 in","description":"\u003cp\u003eThe Siemens DB-HR is a low-profile, surface-mount 4-wire relay base for Siemens H-Series intelligent detectors, providing a relay output to signal other devices.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFor use with H-Series detectors only\u003c\/li\u003e\n\u003cli\u003eMounts on a 4 in box\u003c\/li\u003e\n\u003cli\u003eSuperseded by the redesigned DB2-HR\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Siemens","offers":[{"title":"Default Title","offer_id":44706932162836,"sku":"DB-HR","price":152.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/siemens-bases-default-title-siemens-db-hr-detector-base-relay-surface-low-4-wire-32267867291872.jpg?v=1780943829"},{"product_id":"kidde-ec2-sb-ec2-series-standard-base-edwards","title":"Edwards EC2-SB Standard Detector Base for EC2 Series Heads, 4 in.","description":"\u003cp\u003eThe Edwards EC2-SB is the standard 4 in. base for EC2 Series conventional two-wire detector heads, with four terminals and no relay.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTakes EC2-OS, EC2-OSH and EC2-H heads\u003c\/li\u003e\n\u003cli\u003eWhite, matching the EC2 heads; 12 to 18 AWG field wiring\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Edwards","offers":[{"title":"Default Title","offer_id":47207557628180,"sku":"EC2-SB","price":12.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/Edwards-EC2-SB--768x768.webp?v=1781021794"},{"product_id":"kidde-ki-ib4","title":"Kidde KI-IB4 4 in Isolator Detector Base with Trim Skirt, White","description":"\u003cp\u003eThe Kidde KI-IB4 is a 4 in detector mounting base with a built-in line fault isolator for Class A circuits, supplied with a trim skirt. When a short occurs on the line, all isolators open within 23 ms and then close in sequence to isolate the faulted section.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBuilt-in line fault isolator for Class A circuits\u003c\/li\u003e\n\u003cli\u003eA detector must be installed for the isolator to operate\u003c\/li\u003e\n\u003cli\u003eWiring terminals accessible from the room side after mounting\u003c\/li\u003e\n\u003cli\u003e1-1\/2 in (38 mm) deep; white\u003c\/li\u003e\n\u003cli\u003eMounts to 4 in square boxes; trim skirt covers the mounting ears\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDoes not support the GSA-LED remote LED.\u003c\/p\u003e","brand":"Kidde","offers":[{"title":"Default Title","offer_id":48540091842836,"sku":"KI-IB4","price":102.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/kidde-bases-default-title-kidde-ki-ib4-ki-series-4-isolator-base-white-36376395677920.jpg?v=1780943658"},{"product_id":"kidde-ki-abst","title":"Kidde KI-ABST Addressable Audible Sounder Base for KI Series Detectors, White","description":"\u003cp\u003eThe Kidde KI-ABST is an addressable audible sounder base for Kidde KI Series heat and smoke detectors. It adds a local sound output at the detector location where localized or group alarm signalling is required.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAddressable sounder base\u003c\/li\u003e\n\u003cli\u003eWorks with KI Series heat and smoke detectors, such as the KI-PD optical smoke detector\u003c\/li\u003e\n\u003cli\u003eFor localized or group alarm signalling\u003c\/li\u003e\n\u003cli\u003eWhite finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNot intended for combination CO detectors operating in Fire-plus-CO mode.\u003c\/p\u003e","brand":"Kidde","offers":[{"title":"Default Title","offer_id":48540094365972,"sku":"KI-ABST","price":116.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/kidde-sounder-bases-default-title-kidde-ki-abst-audible-sounder-base-36401928962272.jpg?v=1780943656"},{"product_id":"potter-pad300-lfsb-addressable-low-frequency-sounder-base","title":"Potter PAD300-LFSB Addressable Low Frequency Sounder Base, 520 Hz","description":"\u003cp\u003eThe Potter PAD300-LFSB is an addressable low frequency sounder base for Potter PAD300 detectors, designed for sleeping areas where NFPA 72 requires a 520 Hz low frequency alarm signal. The sounder can be programmed for single-station, zone or all-call operation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e520 Hz +\/-10% square wave output\u003c\/li\u003e\n\u003cli\u003eComplies with NFPA 72 and UL 464 low frequency signal requirements\u003c\/li\u003e\n\u003cli\u003eUses PAD sub-point addressing; does not consume an SLC address\u003c\/li\u003e\n\u003cli\u003eCan be mapped to any device connected to the panel\u003c\/li\u003e\n\u003cli\u003eClass A, Class X and Class B wiring; terminals for 22 to 12 AWG\u003c\/li\u003e\n\u003cli\u003e24 VDC power connection supervised by each base; no external supervision relays needed\u003c\/li\u003e\n\u003cli\u003eField-removable detector locking feature; UL listed for smoke control\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDetector head sold separately.\u003c\/p\u003e","brand":"Potter","offers":[{"title":"Default Title","offer_id":49892103946516,"sku":"PAD300-LFSB","price":301.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/potter-bases-default-title-potter-pad300-lfsb-addressable-low-frequency-sounder-base-31896919572704.jpg?v=1780943081"},{"product_id":"kidde-ki-ablt","title":"Kidde KI-ABLT 520 Hz Low Frequency Sounder Base for CO and Fire Detectors","description":"\u003cp\u003eThe Kidde KI-ABLT is a low frequency sounder base that produces a 520 Hz alarm tone right at the detector. It replaces the standard base under a Kidde intelligent detector, a common choice for sleeping areas where 520 Hz signalling is required.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e520 Hz low frequency audible output\u003c\/li\u003e\n\u003cli\u003eFor Kidde KI and KIR series intelligent smoke and heat detectors\u003c\/li\u003e\n\u003cli\u003eSupports CO detectors in fire-plus-CO mode with a GSA-T3T4 temporal pattern generator\u003c\/li\u003e\n\u003cli\u003eCut-jumper selection of output mode (fire or fire-plus-CO) and volume (high or low)\u003c\/li\u003e\n\u003cli\u003eSounder powered from a 24 VDC riser wired to the base\u003c\/li\u003e\n\u003cli\u003eMounts to a 4 in. square box\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor a standard-frequency sounder base, see the KI-ABST (fire only) or KI-ABDT (CO and fire).\u003c\/p\u003e","brand":"Kidde","offers":[{"title":"Default Title","offer_id":49892123640084,"sku":"KI-ABLT","price":183.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/kidde-sounder-bases-default-title-kidde-ki-ablt-low-frequency-sounder-base-36377529680096.jpg?v=1780942965"},{"product_id":"potter-pad300-lfsb-addressable-low-frequency-sounder-base-low-profile-surface-mount-independent-device-white","title":"Potter PAD300-SB 6 in. Addressable Sounder Base, Low Profile, White","description":"\u003cp\u003eThe Potter PAD300-SB is a 6 in. addressable sounder base for PAD300 series detectors on Potter PAD protocol systems. Its independent sounder module can be programmed to sound as a single station, by zone or as an all-call sounder.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDoes not use an address on the loop; fully programmable to follow any input\u003c\/li\u003e\n\u003cli\u003eReproduces the sound pattern supplied by the power source, then deactivates with it\u003c\/li\u003e\n\u003cli\u003eDetector locking feature that can be used or removed in the field\u003c\/li\u003e\n\u003cli\u003eSounder accessible from the bottom of the unit once the detector is removed\u003c\/li\u003e\n\u003cli\u003eLow profile, surface mount; white\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDetector head sold separately. For a 520 Hz low frequency version, see the PAD300-LFSB.\u003c\/p\u003e","brand":"Potter","offers":[{"title":"Default Title","offer_id":49892138877204,"sku":"PAD300-SB","price":128.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/potter-sounder-bases-default-title-potter-pad300-sb-6-addressable-sounder-base-37809088168160.jpg?v=1780942905"},{"product_id":"potter-pad100-rb","title":"Potter PAD100-RB Addressable 6 in. Relay Base with Form C Relay","description":"\u003cp\u003eThe Potter PAD100-RB is a 6 in. addressable combination sensor base with an included relay module that provides one Form C output.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRelay rated 2 A at 30 VDC and 0.5 A at 125 VAC\u003c\/li\u003e\n\u003cli\u003eUses no SLC address and needs no auxiliary power\u003c\/li\u003e\n\u003cli\u003eField-removable sensor locking feature\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Potter","offers":[{"title":"Default Title","offer_id":49892139565332,"sku":"PAD100-RB","price":151.35,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/potter-bases-default-title-potter-pad100-rb-addressable-relay-base-6-31896920096992.jpg?v=1780942900"},{"product_id":"potter-pad300-ib-6-isolator-base-low-profile-surface-mount-locking-white","title":"Potter PAD300-IB 6 in Isolator Base, Low Profile, Surface Mount, Locking, White","description":"\u003cp\u003eThe Potter PAD300-IB is a 6 in low-profile detector base with an integrated isolator module. When a short circuit is detected, the isolator opens the signaling line circuit downstream so devices between the panel and the isolator keep operating.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIsolator built into the base; accessible once the head is removed\u003c\/li\u003e\n\u003cli\u003eSelf-restoring when the short is cleared\u003c\/li\u003e\n\u003cli\u003eSteady red LED indicates a short circuit\u003c\/li\u003e\n\u003cli\u003eSupports Class A, Class X and Class B wiring\u003c\/li\u003e\n\u003cli\u003eDoes not use an SLC address\u003c\/li\u003e\n\u003cli\u003eTerminals accept 22 to 12 AWG wire\u003c\/li\u003e\n\u003cli\u003eField-usable detector locking feature; UUKL listed for smoke control\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Potter","offers":[{"title":"Default Title","offer_id":49892152312084,"sku":"PAD300-IB","price":121.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/potter-isolator-bases-default-title-potter-pad300-ib-6-isolator-base-low-profile-surface-mount-locking-white-32223434178784.jpg?v=1780942819"},{"product_id":"kidde-ki-abdt","title":"Kidde KI-ABDT Addressable Audible Sounder Base for KI Series and CO Detectors","description":"\u003cp\u003eThe Kidde KI-ABDT is an addressable audible sounder base that adds a local sounder to KI Series smoke and heat detectors. It is intended for locations that need localized or group alarm signalling.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdds sounder capability to KI Series smoke and heat detectors\u003c\/li\u003e\n\u003cli\u003eAlso supports carbon monoxide detectors when used with a GSA-T3T4 temporal pattern generator\u003c\/li\u003e\n\u003cli\u003eFor localized or group alarm signalling\u003c\/li\u003e\n\u003cli\u003eWhite finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kidde","offers":[{"title":"Default Title","offer_id":49892159127828,"sku":"KI-ABDT","price":125.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/kidde-sounder-bases-default-title-kidde-ki-abdt-audible-sounder-base-36401971757280.jpg?v=1780942775"},{"product_id":"kidde-ki-rb-ki-series-detector-mounting-base-with-relay","title":"Kidde KI-RB KI Series Detector Mounting Base with Relay","description":"\u003cp\u003eThe Kidde KI-RB is a mounting base with a built-in relay for Kidde KI series intelligent detectors. The relay can follow the detector or be operated by the control panel as a control relay, for example to shut down fans or release doors locally.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRelay with normally open or normally closed operation, selected at installation\u003c\/li\u003e\n\u003cli\u003eDry contact rated 1 A (pilot duty) at 30 VDC\u003c\/li\u003e\n\u003cli\u003eRelay position supervised so it cannot be jarred out of place unnoticed\u003c\/li\u003e\n\u003cli\u003eCan operate as a control relay when programmed at the control panel\u003c\/li\u003e\n\u003cli\u003eFor KI series intelligent detectors\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis base does not support the GSA-LED remote LED.\u003c\/p\u003e","brand":"Kidde","offers":[{"title":"Default Title","offer_id":49892184785172,"sku":"KI-RB","price":83.7,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/kidde-bases-default-title-kidde-ki-rb-ki-series-detector-mounting-base-36498327929056.jpg?v=1780942629"},{"product_id":"system-sensor-b501bp","title":"System Sensor B501BP 4 in. Flangeless Intelligent Detector Base, Pack of 10","description":"\u003cp\u003eThe System Sensor B501BP is a bulk pack of ten B501 four-inch flangeless mounting bases for plug-in intelligent detectors. The bases have screw terminals for power and a remote annunciator connection.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePack of 10 B501 bases\u003c\/li\u003e\n\u003cli\u003e4 in. flangeless design\u003c\/li\u003e\n\u003cli\u003eScrew terminals for power (+ and -) and remote annunciator\u003c\/li\u003e\n\u003cli\u003eQuick, secure detector plug-in\u003c\/li\u003e\n\u003cli\u003eSEMS screws for easy wiring; accepts 24 to 12 AWG wire\u003c\/li\u003e\n\u003cli\u003eMultiple accessory options for mounting flexibility\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"System Sensor","offers":[{"title":"Default Title","offer_id":49892188553492,"sku":"B501BP","price":47.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/system-sensor-bases-default-title-system-sensor-b501bp-detector-base-bulk-pack-with-10-units-31897166381280.jpg?v=1780942617"},{"product_id":"mircom-msb-65b-4r","title":"Mircom MSB-65B-4R Series 65 Four-Wire Relay Base with Auxiliary Form C Contact","description":"\u003cp\u003eThe Mircom MSB-65B-4R is a four-wire auxiliary relay base for Mircom MIR-65 series conventional detector heads. It is used with control units that have a resettable four-wire detector supply, and can provide volt-free control signals to auxiliary systems such as door closers where codes allow.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour-wire base with auxiliary relay contact\u003c\/li\u003e\n\u003cli\u003eSupply voltage 9 to 33 VDC\u003c\/li\u003e\n\u003cli\u003eContact rating: 1 A resistive; 30 W \/ 50 VA maximum; 50 VAC \/ 75 VDC maximum\u003c\/li\u003e\n\u003cli\u003eSupplied with low-profile skirt and spanner bar\u003c\/li\u003e\n\u003cli\u003eOne-way fit, earth ground connection, accepts the head locking screw\u003c\/li\u003e\n\u003cli\u003e-20 to 70 °C (-4 to 158 °F), no condensation or icing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAccepts Mircom MHD-65-135 \/ MHD-65-200 heat, MPD-65P photoelectric and MID-65I ionization detectors.\u003c\/p\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":49892214636820,"sku":"MSB-65B-4R","price":42.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/mircom-bases-default-title-mircom-msb-65b-4r-series-65-four-wire-base-31896881758432.jpg?v=1780942536"},{"product_id":"kidde-kc2-rb-kc2-series-relay-base-4-terminals-auxiliary-relay-4-diameter","title":"Kidde KC2-RB KC2 Series 4 in. Relay Base with Auxiliary Relay, White","description":"\u003cp\u003eThe Kidde KC2-RB is a 4 in. relay base for KC2 Series conventional two-wire detectors. It connects the detector head to the circuit and adds a relay whose contacts change state automatically when the detector goes into alarm.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAuxiliary relay; normally open or normally closed selected at installation\u003c\/li\u003e\n\u003cli\u003eDry contact rated 1 A (pilot duty) at 30 VDC; relay position supervised\u003c\/li\u003e\n\u003cli\u003eWiring terminals accessible from the room side after mounting\u003c\/li\u003e\n\u003cli\u003e4.4 in. diameter x 0.75 in. high; white\u003c\/li\u003e\n\u003cli\u003eMounts to a single-gang box or 3-1\/2 in.\/4 in. octagon box 1-1\/2 in. deep\u003c\/li\u003e\n\u003cli\u003eAccepts KC2 Series heads such as the KC2-OS-CD\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor a 4 in. square box use the KC2-RB4. GSA-TS trim skirt available separately; the GSA-LED remote LED is not supported on relay bases.\u003c\/p\u003e","brand":"Kidde","offers":[{"title":"Default Title","offer_id":49892218437908,"sku":"KC2-RB","price":36.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/kidde-bases-default-title-kidde-kc2-rb-relay-base-36504096276704.png?v=1780942520"},{"product_id":"kidde-kc2-rb4","title":"Kidde KC2-RB4 4 in. Relay Base for KC2 Conventional Detectors, White","description":"\u003cp\u003eThe Kidde KC2-RB4 is a relay mounting base for Optica KC2 series conventional two-wire detectors. Its relay changes state when the detector head alarms, providing a local contact for functions such as fan shutdown, door release or auxiliary annunciation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAccepts KC2 series heads, including KC2-OS-CD optical smoke and KC2-H-CD heat\u003c\/li\u003e\n\u003cli\u003eDry contact rated 1 A (pilot duty) at 30 VDC; normally open or normally closed selected at installation\u003c\/li\u003e\n\u003cli\u003eRelay position is supervised against being jarred out of place\u003c\/li\u003e\n\u003cli\u003eTabs for a 4 in. square box; trim skirt included to cover them\u003c\/li\u003e\n\u003cli\u003eAlso mounts to single-gang, 3-1\/2 in. and 4 in. octagon and BESA boxes\u003c\/li\u003e\n\u003cli\u003e4.4 in. (11.18 cm) diameter, 0.75 in. (1.9 cm) off the box; white\u003c\/li\u003e\n\u003cli\u003ecULus listed, FM approved, CSFM listed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDoes not support the GSA-LED remote indicator, and does not accept Kidde KI series heads.\u003c\/p\u003e","brand":"Kidde","offers":[{"title":"Default Title","offer_id":49892218601748,"sku":"KC2-RB4","price":36.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/kidde-bases-default-title-kidde-kc2-rb4-base-conventional-2-wire-4-inches-36504092704992.png?v=1780942519"},{"product_id":"fire-lite-b501-white-4-standard-european-flangeless-mounting-base-ul-ulc-listed-white","title":"System Sensor B501-WHITE 4 in. Flangeless Detector Mounting Base, White","description":"\u003cp\u003eThe System Sensor B501-WHITE is a compact 4-inch plug-in base for intelligent smoke, heat and multi-criteria detectors. Its flangeless, low-profile design keeps a clean look on the ceiling while allowing heads to be swapped without rewiring.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e4 in. flangeless plug-in detector base\u003c\/li\u003e\n\u003cli\u003eSEMS screw terminals for quick wiring\u003c\/li\u003e\n\u003cli\u003eMechanical locking feature restricts removal of the detector head\u003c\/li\u003e\n\u003cli\u003eLow-profile design, about 0.7 in. high\u003c\/li\u003e\n\u003cli\u003eBright white finish\u003c\/li\u003e\n\u003cli\u003eUL\/ULC listed; UL 268\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDetector head sold separately. For a larger flange that covers more junction box sizes, see the 6 in. B300-6.\u003c\/p\u003e","brand":"System Sensor","offers":[{"title":"Default Title","offer_id":49892219420948,"sku":"B501-WHITE","price":16.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/system-sensor-bases-default-title-system-sensor-b501-white-4-inch-base-34869592490208.jpg?v=1780942514"},{"product_id":"potter-pad300-4db-4-detector-base-low-profile-surface-mount-white","title":"Potter PAD300-4DB 4 in Low-Profile Detector Base, Surface Mount, White","description":"\u003cp\u003eThe Potter PAD300-4DB is the standard 4 in low-profile surface-mount base for PAD300 Series addressable detector heads. It is a plain base with no relay, sounder or isolator; the detector head is ordered separately and twists on.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eScrew-clamp SLC terminals, duplicated for in\/out wiring and marked with polarity\u003c\/li\u003e\n\u003cli\u003eTerminals accept 22 to 12 AWG wire\u003c\/li\u003e\n\u003cli\u003eLocking tab deters unauthorized head removal\u003c\/li\u003e\n\u003cli\u003e3.93 in (100 mm) diameter, 0.76 in (20 mm) high, 1.34 oz (38 g)\u003c\/li\u003e\n\u003cli\u003eInstallation temperature 0 to 66 °C (32 to 150 °F), 0 to 93 % RH non-condensing\u003c\/li\u003e\n\u003cli\u003eFits single or double gang, 3-1\/2 in and 4 in octagon, 4 in square and 50\/60\/70 mm boxes\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHeads with built-in isolation (PAD300-PD-I, PHD-I, HD-I, CD-I, PCD-I) need the PAD300-4DB-I. Relay, isolator and sounder bases in this family are 6 in bases.\u003c\/p\u003e","brand":"Potter","offers":[{"title":"Default Title","offer_id":49892230037780,"sku":"PAD300-4DB","price":10.7,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/potter-bases-default-title-potter-pad300-4db-4-detector-base-32391621411040.jpg?v=1780942463"},{"product_id":"hochiki-ns6-221","title":"Hochiki NS6-221 Conventional Detector Base, 6 in., 2-Wire, 24 VDC","description":"\u003cp\u003eThe Hochiki NS6-221 is a 6 in. two-wire mounting base for Hochiki conventional detectors on 24 VDC systems. It has no electronics, keeping installation simple.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6 in. base for Hochiki conventional detectors\u003c\/li\u003e\n\u003cli\u003e2-wire, 24 VDC\u003c\/li\u003e\n\u003cli\u003eElectronics-free design\u003c\/li\u003e\n\u003cli\u003ePlastic tamper-lock lug\u003c\/li\u003e\n\u003cli\u003eResistor included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hochiki","offers":[{"title":"Default Title","offer_id":49892244226324,"sku":"NS6-221","price":17.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/hochiki-bases-default-title-hochiki-ns6-221-conventional-detector-base-31896848793824.jpg?v=1780942416"},{"product_id":"kidde-kc2-sb-standard-smoke-detector-base-compatible-with-aegis-2-0-and-aegis-xlt","title":"Kidde KC2-SB Standard Detector Base for Optica KC2 Conventional Detectors","description":"\u003cp\u003eThe Kidde KC2-SB is a standard (non-relay) detector base for Optica KC2 Series conventional detectors. The base carries the field wiring; the KC2 head twists in and can be removed for service without disturbing the circuit.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStandard base, no relay (KC2-RB and KC2-RB4 are relay versions)\u003c\/li\u003e\n\u003cli\u003eTerminals for IDC in and out plus a remote LED output\u003c\/li\u003e\n\u003cli\u003e4 in. nominal diameter, white\u003c\/li\u003e\n\u003cli\u003eMounts to a single-gang box or 3 1\/2 in. or 4 in. octagon box, 1 1\/2 in. deep\u003c\/li\u003e\n\u003cli\u003eGSA-LED remote alarm indicator listed for this base; GSA-TS trim skirt optional\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor a 4 in. square box order the KC2-SB4. Detector head sold separately.\u003c\/p\u003e","brand":"Kidde","offers":[{"title":"Default Title","offer_id":49892244521236,"sku":"KC2-SB","price":12.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/kidde-bases-default-title-kidde-kc2-sb-standard-base-ec2-series-36748017107168.png?v=1780942413"},{"product_id":"hochiki-ns6-100","title":"Hochiki NS6-100 Conventional Detector Base, 2-Wire, 6 in., 24 VDC","description":"\u003cp\u003eThe Hochiki NS6-100 is a 6 in. conventional 2-wire detector base for Hochiki conventional smoke and heat detectors on 24 VDC systems. It is an electronics-free base with a tamper-lock feature.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6 in. conventional detector base\u003c\/li\u003e\n\u003cli\u003e2-wire, 24 VDC\u003c\/li\u003e\n\u003cli\u003eElectronics-free design\u003c\/li\u003e\n\u003cli\u003ePlastic tamper-lock lug\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDetector head sold separately. Confirm detector compatibility with the Hochiki data sheet.\u003c\/p\u003e","brand":"Hochiki","offers":[{"title":"Default Title","offer_id":49892244750612,"sku":"NS6-100","price":13.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0516\/9172\/files\/hochiki-bases-default-title-hochiki-ns6-100-conventional-detector-base-35152694640864.jpg?v=1780942411"}],"url":"https:\/\/jemsystems.ca\/collections\/bases.oembed?page=4","provider":"JEM Systems Canada","version":"1.0","type":"link"}